Home » Most common Computer problems and their solutions?

Most common Computer problems and their solutions?

by henry7
computer

1. The computer can’t switch on.

This is likely end up being the most significant issue that all of us will face. The best method of understanding the problem is to view it from the point of view of the body we were born with.

If we’re sick, it’s normal to experience an illness that may result in fever. It’s the body’s defense mechanism to fight against infection. In the event that your system is having problems and is unable to function, you must fix the issue.

There are a myriad of reasons for computers not to start. It could be due to the power source is affected or may be caused by an infecting virus. The rule of thumb is that your system should be able to boot up following the steps below.

1. Make sure that the power source is working.

If you’re using a laptop it could be caused by the battery being overloaded. Connect it to the battery and let it recharge for a couple of hours. If it doesn’t then it’s likely that the electrical supply for your device is not working.

2. Make sure your monitor or display working.

There are many possible problems to think about if your PC is not working when the fans begin to turn on as well when power lights is on but nothing else going on.

If you own an old desktop computer that connects to a different monitor, it could be due to the display. Check that the power source of your display is in operation and the display is connected to your computer. Be sure to unplug the monitor before connecting. If this doesn’t work try connecting to another monitor, if it’s possible. If you do this, you’ll know the problem in the display. Is there a problem.

If you own a laptop , or had the capability to completely eliminate the possibility of the external screen, then it’s likely that your laptop is sleeping and won’t be able to get up. To determine this, switch off all power and then begin starting from scratch. Do this by press your power switch for five seconds, then press it once more to reboot your system.

3. Uninstall any hardware that isn’t yours.

If none of the strategies listed above performs, then peripherals could be the cause. This could be due to electrical or mechanical issues or even the hardware issue is outside for the computer system.

After that, restart the computer to confirm that it functions. If not, continue to the next step.

4. Install the operating system on your computer.

In the event that none of these options mentioned above work, the last thing you’ll need to do is install Windows. At present you’re probably to find that the issue is with the program, rather than the hardware.

The file can’t be accessed because it isn’t connected to your laptop. However, there are options to remove the data on your drive. If your system is damaged or infected A clean install can allow you to restore your system to its normal state.

2. Internet connection is not always reliable. Internet access

There’s nothing more irritating than an insecure internet connection. I’m sure that you’re not able stream the most popular Netflix show, or keep in contact with your friends on Facebook.

It’s usually an issue that’s easy to resolve. The issue could be classified into two distinct areas that are internal (problems related to your internet device) as well as external (that are related to Internet services)

Solution Make sure that you have started the modem.

Like how you handle other devices. A sudden surge in electricity or excessive use or use of an Internet modem could cause it to malfunction.

In order to restore normalcy, it’s just as easy as turning off your modem, then letting it idle for a bit and then turning to. Most of the time, you’ll be fine.

2. Increase Your WiFi’s signal strength

Regarding wireless connectivity, you may find that your router and internet connection are functioning perfectly, however your wireless connection isn’t quite as robust. This could lead to delays, or at most, the experience of browsing may be slow. In this case you can employ several techniques to improve or alter the performance of your router.

Go to this site for helpful tips on getting rid of your WiFi signal.

3. Get rid of any background programs that are not needed

Background operations, including software updates, or other programs which require internet connectivity could consume your data, that can reduce the speed of your internet connection.

You can look up the list of programs and close it by looking on your task control. A way to turn off automatic updates from the settings could be beneficial.

4. Make sure you are connected to your ISP

If none of these solutions are working, the problem could be due to an external source for example, the Internet company.

This could be due to the extreme weather that occurs during the upgrade of your network, or fixing wires. They’ll be sure to assess the strength of your internet connection and give you recommendations on the steps you need to follow.

3. PCs might be slow

I’ve had the experience of frustration that it takes 5 mins to launch an application. This is a common issue when it comes to computers, and is something that users encounter frequently.

The reason for this is typically determined by how long you’ve used your computer. This could be the case with any computer older then two years old regardless of the specifications.

1. Choose a program that makes use of resources

If you have a computer packed with programs, you’ll probably have several that consume a large amount of RAM.

Start your Task Manager to see the status of your task. To access it, right-click your taskbar and select “Task Manager”” or use Ctrl+Shift+Escape. Windows 8, 8.1, and 10 are supported.

For sorting the list according to programs which make use of those resources that are most effective,, choose the headings “CPU,” “Memory,” and “Disk” headings. If a program uses excessive amounts of resource, it should stop it by itself. If you are unable to stop it, simply choose it and then select “End Task” to force it to stop its operation.

2. Stop the program prior to it starts.

Autostart software that starts up during startup could be the root cause for the computer’s inability of running efficiently.

For Windows 8, 8.1, and 10 for Windows 8, 8.1, and 10, the Task Manager was updated to let users control the program’s start-up.

To open it, just click on the taskbar, then select “Task Manager” or use Ctrl+Shift+Escape. Select the Startup tab, and then switch off any startup programs that you do not need.

Windows will inform you of which programs are slowing the process about to start.

You can check them for viruses and identify the malware by using your antivirus software that is built-in to get rid of these dangers. Visit my blog for more details about how to eliminate spyware and adsware.

4. Windows Update Issue

Windows updates could be the result of many reasons. The reason could be due to Windows pirates or files absent that cause a lot of the issues related to licencing and other.

The issue isn’t serious. If you’re looking to stay on top of security and software, you must address the problem.

Answer: This is easy. Windows comes with its own set of systems to handle this issue, which includes an integrated system to identify errors and troubleshooting.

If you are unable to fix the issue, attempt the standard Microsoft Windows update issues resolution procedure here.

5. Loud Hard Drive

Hard drives generally do not produce any sound however some can emit an audible squeak whenever they’re opened, or turned off. The sound is quite common.

If you begin hearing sounds that you’ve never previously heard, like clicking, grinding or a rumbling sound your hard drive may be experiencing issues.

1. be sure that the sound originates from the hard drive.

If we hear sounds emanating from our computers, most of the time it is because the sound originates via an internal hard disk. If the sound gets more intense than we would think, then we believe that it’s from the hard drive.

To test this, unplug the drive’s power and data cables and then turn it back on. it. If you’re hearing the noise, then the issue isn’t caused by the drive.

2. Execute diagnostic software

If you’re sure that it’s due to the drive try an diagnostic program for the hardware you have installed on several computers or accessed through the internet.

3. Change the drive

If the diagnostic software isn’t functioning this is a sign that there’s a problem with the hardware in the device. If this is the case, the only alternative is to replace the drive.

Create backups of your personal information prior to replacing your data.

6. There is no fan on My Computer

The most frequent issue that happens when computers are in the hardware aspect. But, consider the issue if the fan stops working.

If the CPU’s temperature is at a low or no energy-intensive applications are running you can anticipate that the CPU’s fan to start to stop spinning.

In most cases it’s the motherboard which is the culprit, not the fan.

1. Find the root cause of the issue

As we’ve previously mentioned that the motherboard could be the cause of why the fan won’t turn. This could be due to the fan isn’t properly installed on the motherboard or there’s a problem with the connections to the motherboard.

Check to see if it’s linked to an outside power supply in order to verify if it’s operating. If not, the issue lies with the fan in itself.

2. Examine the fan.

3 of the top most popular fan-related problems:

The CPU fan helps to reduce dust

It is believed that it is the situation that the CPU Fan Bearing is now stuck.

The CPU fan is not functioning.

At first you can wash it with a towel. If you are looking to replace the component in the next and third scenarios, and with the most serious problems are encountered, it is advised to seek out a professional repair help for your computer.

7. The Printer isn’t working

There are many reasons your printer doesn’t print so it’s important to start by studying the fundamentals.

Examine the tray to determine if there’s any newspaper inside the tray(s) and ensure that the toner or ink cartridges aren’t overflowing.

The approach described here can help you solve the majority of basic problems.

Solution: 1. Reboot the printer.

Simply cancelling an any ongoing printing task and restarting the printer, you can yield incredible results.

You must restart the printer to ensure that everything is running correctly.

2. Check that your computer is working properly.

Each printer has the driver that is unique to it, and it is connected to the computer. If there’s a problem the system will notify the printer, as well as its troubleshooting options.

The majority of problems are easily solved. Verify that the driver for the printer are in place and operating in a safe manner.

8th. 8. Blue Screen of Death (BSOD)

“The Blue Screen of Death (BSoD) is often is referred to as “a “blue screen”” “stop an error” or “system crashes” happens in the event that your operating system doesn’t seem to be able of the resolution or processing of an issue that’s significant.

A majority of the time, people may observe a blue-colored screen changing to a different version of Windows during start up or when you’re working on their PC. The most irritating thing is that it’s the exact same dull dark blue backdrop with an unhappy face, however there’s no way to determine the cause. Additionally, you can find an error message called error code 0x0 0x0 that can cause your system to collapse..

2. Run a virus test on a single computer.

Certain viruses, especially those that affect the master boot record (MBR) or the boot sector, may cause a Blue Screen of Death.

3. Install the most current drivers for the device you’re using.

Because the majority of Blue Screens of Death are caused by drivers or hardware the update of drivers may resolve a STOP issue.

4. You need to restore to standard BIOS settings to default settings.

A badly set up or overclocked BIOS can cause a variety of unpredictable issues, including BSODs.

5. Test diagnostics on any device that can be test.

A part of the hardware which is not working is often the reason for a Blue Screen of Death.

9th. Computer Frozen

Computers that are running slow or outdated may cease to function sometimes. Most often, the reason for this is due to a insufficient resources.

If you’re experiencing this issue, seek out an expert. The problem is that Windows is beginning in slowing down. The solution to this problem is by reading the paragraph before.

10. System Restarts Automatically

The final, and certainly not the least, is computer-related issues, and possibly the most unsettling!

There are a myriad of reasons to this problem. It could be due to various issues, such as ineffective drivers, malfunctioning devices or malware among others.

It can be difficult to pinpoint the reason behind why your computer’s shutdown. Most likely, it is because of an upgrade to a Windows upgrade.

To find out more go to: Zigwheels

1. Get rid of registry files not working properly.

You need to be certain that you are able to achieve success without making any mistakes prior to beginning.

It is vital to realize that it’s true that Windows Registry is a private database. A simple comma mistake could result in damage to your PC! This is why I recommend an application that is single-click, such as Auslogics Registry Cleaner.

This shareware searches for damaged or duplicate registry files and replaces them promptly.

2. Driver updates

It is essential to keep your driver’s licence current.

3. Troubleshooting hardware-related issues

The computer may continue to restart in certain instances because of malfunctioning hardware. The three main hardware components that need to be examined are:

External Devices, such as memory and processors

4. Protection against viruses and malware

Your computer could be infected with viruses or malware, and that’s why it’s always running. Windows Defender allows you to run a complete virus scan. In addition it’s feasible to use third party software such as AVG security, or the trend.

Related Videos

Leave a Comment