Home » Fix: USB Device over current status detected [Best Solutiion]

Fix: USB Device over current status detected [Best Solutiion]

Fix USB device over current status detected

by visiontechnews

After playing video games for a couple of hours, your computer suddenly shuts down, and you may even smell things burning, you will see the message USB Device Over Current Status Detected! notifying you that you are not alone. This issue is also being reported by other Asus users. But don’t worry, there’s still hope; you can easily fix it yourself. Continue reading to learn how.For Fix USB device over current status detected

When you’re building a new PC and turning it on for the first time, or when the USB port on your motherboard is damaged, you’ll get the error “USB Device over current state detected.” This is a rather typical error with a wide range of causes.

This error usually indicates that a USB device has been disabled by the computer due to an overloading circuit. This is done to keep your hardware safe from further harm.

It’s possible that a new motherboard is broken or has a manufacturing flaw if you’re trying to utilise it. This, or a gadget you’re attaching to the USB port is broken, etc. We’ll go over all of the similar examples one by one so you can see which one applies to your situation.

About the Error USB Device Over Current Status Detected:

A sudden shutdown is really frustrating. After playing video games for a few hours, your computer might occasionally shut down unexpectedly. You might even smell things burning. When you try to boot your computer after that, Windows 10 notifies you that a USB device with the current status has been identified on a black screen.

Actually, numerous Asus consumers have brought up this issue. When you are assembling a new PC and turning it on for the first time, this USB over current warning could also show. The message often informs the user that a USB device has been disabled by the computer due to an overloading circuit.

Method 1: Verify that the front USB ports are connected

In this procedure, you must determine whether the USB connectors are the source of the problem on the motherboard. Follow the instructions below:

Step 1.   Shut Down Your Computer

Make sure the entire computer system is turned off. It’s also a good idea to unhook the power cable.

Step 2.   Open the Case of Your System

Remove the bolts from your system’s case to open it. Take cautious when doing so. If you’re having trouble, seek help from a professional.

Step 3.  Find USB connections.

Attempt to locate the USB connectors. These connectors connect your computer system’s front ports to the motherboard.

Step 4.  Disconnect the Connector

Turn on your computer after unplugging this connector. If the error warning “USB Device Over Current Status Detected” disappears, the issue was with your USB socket connector. You can either buy a new one or have it repaired by a computer specialist.

Let’s move on to the second remedy if you’re still having problems.

You can contact us. Visiontechnews will provide you the best service. So that you will not face any kind of problem. Contact us for Hajj.

Related Videos

Leave a Comment