Have you purchased the hanging picture and want to know the hanging tips? If yes, you have come to the right platform because it is a way to make a house feel like a home. In addition, ceiling hooks help to transform an empty room into a finished-looking space. They easily adjust or fit your room and decor to swap out if your preferences change. You can easily hang a picture using picture hooks correctly without harming your walls. But before beginning, you need to consider important factors that matter a lot.
This post focuses on the practical and useful tips that help you while hanging the picture. Using them you can complete a task without any hassle. Let’s dive into the details.
Useful Tips for Hanging Picture
-
Select the Appropriate Wall Mount
It is important before you touch a drill or a hammer, you should know about a few things. Moreover, to begin, you need to think about two things. One is the state of the wall you want to decorate and the weight of the artwork. They are pieces of wood or metal that run vertically behind the wall to support your wall. Moreover, screwing directly into a stud is able to provide extra support to hanging items.
In case you have a reinforced wall hang the frame with a simple nail or screw. You can hang this as long as the nail or screw is firmly inserted into a stud. Using the wall anchors, with plastic or metal provides you greater support for screwing into an unreinforced wall. They are useful for medium to heavy pictures. You can select from various materials and weights, and strengths. If there is a hook or a string on the picture, you can thread a screw into them.
-
Inspect the Hardware on the Frame
You need to search about the material of the frame. Even also the type of hanging hardware is determined by the frame’s size and weight. No doubt, most of the frame makers include a hanger on the back of their products.
So that you can find the hook tabs and work well for hanging lighter pictures. Moreover, you can also prefer a wired system for hanging heavy pictures. This system consists of two anchor points on the back of the frame and a strong wire strung. This string is inserted between them for looping over the wall screw or hook. It is suggested don’t put all of the weight of the frame on one small hanger point.
You can allow the weight of the frame to be spread equally down the wire for more stable hanging. It is common that most of the frames have hardware already fitted on the back. It doesn’t matter whether you bought them at a store or had them custom-made. You should start with a center hanging point, a hook tab fastened in the right spot. Generally, a wire is strung slackly between two tabs. This is on either side of the frame if your frame has two tabs on either side of the frame.
-
Keep the Appropriate Tools on Hand
In this step, you need to collect the required tools before you take any action. As you know, for proper positioning and fighting you need to be that you have everything. These tools include a hammer, wall anchor, and nail, with the appropriate hanging gear for your project.
It is recommended to use a wall anchor, power drill, or screwdriver to install. Moreover, a tape measure calculating the ideal hanging spot is much easier. A robust wire for the back of your frame and using a level to verify your picture is level.
-
Hang at the Appropriate Height
While positioning you should experiment with the frame’s height. You can use an eye-level that can settle within the bottom half of the frame. Moreover, people frequently select photos that are either too big or too little in proportion to the wall area.
It is general, you don’t want a painting to be completely lost on a large wall. But there is no specific ratio of image size to wall area so you’re the best judge of your surroundings.
-
Select the Wall Space on Which Your Photo will be Hanged
Now place the frame against the wall on which it will be hung. It is ideal if someone is with you. Doing this, the person tells the appropriate position while hanging. It is best to see the place before fixing it to the wall, this will let you decide if it looks right.
Even more, you can draw a small line with a pencil along the center of the frame’s top edge. This line you can see as your reference line after you’ve chosen your position.
-
Record your Measurements
In this section, you can place the frame on a flat surface and then face down. After this, pull the wire taut and place your wall fastener. This includes a wall anchor or Command hook, in the proper hook tab on the rear of the frame. You should measure the distance between the top edge and the center of the fastener with tape.
-
Hang the Frame after Placing your Wall Fastener
In this tip, from the center of your penciled reference line, you can measure the same distance. Moreover, with your pencil, you can make a mark on the spot where you’ll install the fastener. In case you don’t want to use a wall anchor, use an adhesive hook, nail, or monkey hook. Then drill a hole in the wall at the penciled location.
This location has a screw that is thinner than the anchor itself to install an anchor. You can pull the screw out by reversing the direction of the drill. So place the anchor flush against the wall using the hammer in place. Now, you can drive the screw into the anchor and expand somewhat and press against the drywalls. Moreover, make sure there’s enough space between the head of the screw and the wall.
Final Thoughts
Hopefully! You find this content useful while hanging the picture frame. Just need to follow all the steps to place the frame to ensure picture hooks are straight. Using the required tools, and ceiling hooks you can easily hang your desired picture parallel to the floor.
Thanks for Reading!
Forward this article to your friends who want to know useful tips for hanging pictures.
Read more Blog: Nativesnewonline
